A GroupHES Company
 



 

Head Office Gloucester

Email
tel:01452 730774
fax:01452 731637

Birmingham

Email
tel:01213272664 fax:01213222488

Durham

Email
tel:01914106619 fax:01914111055

Leeds

Email
tel:01132707295 fax:01132703213

 

 

Catalogue Navigation Menu




 

 

 
Directional Valves

MANUALLY OPERATED DIRECTIONAL CONTROL VALVES
LVD-K10

Flows up to 45 l/min

 

Pressures up to 350 bar
Parker directional control valves comprise of a steel spool sliding within a cast iron body. The position of the spool determines which flow path the oil can take & therefore which direction of motion is operated. Typical applications are where a manual input is needed to effect a rapid change in the direction of an actuator or function.
 

 

 

ADVANTAGES

INTEGRAL RELIEF VALVE INLET SECTION

Units are supplied complete with relief valve built into the valve's inlet section and pressure port load checks.

SPRING OR DETENTED CONTROL OPTIONS

Spool functions can be spring centred, spring offset or detented together with optional 'float' facility.

ALL SPOOL OPTIONS AVAILABLE

Extensive range of spool options are available with & without load port reliefs, pilot operated non-return valves or special metering options.

SECTIONAL CONSTRUCTION

Sectional construction allows for flexibility in design. Mid inlet sections & flow control sections are also available.

Ordering

LVD-S3-K



LVD-D3-K


LVD-D-K



LVD-M3-K


LVD-DD-K



LVD-DDD-K


LVD-DDDD-K



LVD-DDDDD-K

Description

Single acting hand operated
directional valve, detent control
c/w relief valve.

Double acting hand operated
directional valve, detent control
c/w relief valve.

Double acting hand operated
directional valve, spring centred
c/w relief valve.

Double acting hand operated
directional valve, detent control
motor spool c/w relief valve.

2 bank double acting hand
operated valve, spring centred c/w
relief valve.

3 bank double acting hand
operated valve, spring centred c/w
relief valve.

4 bank double acting hand
operated valve, spring centred c/w
relief valve.

5 bank double acting hand
operated valve, spring centred c/w
relief valve.

Temperature

Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.

Filtering

It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system.

 

 

View our latest company news here

Hydraulic Equipment Supermarkets have been awarded the distributorship in England & Wales for the new Magnom Pumpmate. Click here to download pdf file
Click here to request your free 'New' Outline Brochure.

Manufacturers:

Sauer Danfoss
Parker Hydraulics
Sterling Hydraulics
Duplomatic
Filpro
Hallite Seals
HSP
Hy-Pro
Rastelli Raccordi
Tecreel
Wika
Webtec