A GroupHES Company
 



 

Head Office Gloucester

Email
tel:01452 730774
fax:01452 731637

Birmingham

Email
tel:01213272664 fax:01213222488

Durham

Email
tel:01914106619 fax:01914111055

Leeds

Email
tel:01132707295 fax:01132703213

 

 

Catalogue Navigation Menu




 

 

 
Orbit Motors

LOW SPEED HIGH TORQUE HYDRAULIC MOTORS
OML & OMM

Capacities 8cc - 50cc/rev


Speeds 0-1500rpm


Pressures up to 225bar
Sauer-Danfoss 'Orbit' type hydraulic motors operate on the principle of an internal gear rotating within a fixed external gear. The internal gear transmits the torque generated by the application of pressure from the hydraulic oil fed into the motor which is then delivered via the motor's output shaft. Typical applications for these motors are winch drives, mixer drives, elevator drives, small vehicle transmissions & machine tools.
 

 

 

ADVANTAGES

CONSTANT OPERATING TORQUE

Choosing the correct capacity of motor for your particular application will ensure an almost constant output torque across the operating speed range.

HIGH STARTING TORQUE

Torques from a stalled condition can be typically 80% of the equivalent running torque, ensuring good starting performance.

3 HOLE TAPPED OR 2 BOLT FLANGE MTS
Normally the three tapped holes in the motor housing are sufficient for most applications but a two hole flange can be fitted to the motor if required.

HIGH PRESSURE SHAFT SEALS

High pressure shaft seals can allow units to be operated upstream of another function, without the need for additional seal drains.

Ordering

OML8cc 151G-2001
OML12cc 151G-2002

OML20cc 151G-2003
OML32cc 151G-2004

OMM8cc 151G-0040
151G-0041

OMM12cc 151G-0001
151G-0004

OMM20cc 151G-0002
151G-0005

OMM32cc 151G-0003
151G-0006

OMM40cc 151G-0277
151G-0279

OMM50cc 151G-0037
151G-0013

Description

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP end ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP end ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

3 bolt mount 16mm shaft BSP end ports
3 bolt mount 16mm shaft BSP side ports

Temperature

Oil temperature should be between +30ºC & +60ºC during normal operation. Oil life is greatly reduced if temperature exceeds 60ºC. As a general rule, oil life is halved for each 8ºC temperature exceeds 60ºC.

Filtering

It is necessary to keep the level of contamination within a hydraulic system at an acceptable level to ensure trouble free operation. Filtration should always be specified at a level that protects the most sensitive item or component in the system.

 

 

View our latest company news here

Hydraulic Equipment Supermarkets have been awarded the distributorship in England & Wales for the new Magnom Pumpmate. Click here to download pdf file
Click here to request your free 'New' Outline Brochure.

Manufacturers:

Sauer Danfoss
Parker Hydraulics
Sterling Hydraulics
Duplomatic
Filpro
Hallite Seals
HSP
Hy-Pro
Rastelli Raccordi
Tecreel
Wika
Webtec